As an AC/DC inverter TIG welder, the Alpha TIG 225Xi delivers pro-level features in an economically minded package that out performs major competitors' models nearest to our price. For comparison, the Alpha TIG 225Xi range of features includes fully adjustable AC frequency and AC balance settings which improve penetration, tungsten life, arc cone properties and etching width. The 2T/4T Sequencer function allows the unit to be used with a remote switch and enables it to cycle through programmable features such as pre-flow & post-flow control, and start & end cycle amps without the need of a foot pedal. This is especially helpful for welding out of position, where a conventional foot pedal may not be useful. As well. the Pulse feature is fully adjustable so that the operator can carefully control the heat by adjusting base welding amps, peak welding amps, pulse frequency and the division of time between the high and low amp stages of the pulse cycle. The stick welding feature is capable of both AC/DC.

Power Source: 110/120V Electric, 208/240V Electric
Current: 1 Phase
Processes: Stick, TIG
Model: AlphaTIG 225Xi

- Powerful 225 amp AC/DC TIG welder
- Includes Stick Welding function
- Capable of handling most welding applications
- Water Cooler Outlet on Rear
- High Frequency TIG start
- Powerful 150 amp output on 120v
- Full 225 amp output on 240v
- 35% duty cycle at 225 amps (240v)
- Pulse frequency 0.5 to 200hz
- Minimum start amps DC 10amps
- Minimum start amps AC 20amps
- 2T/4T function
- Start and End amps adjustment in 4T mode
- NEMA 6-50 Plug wired on cord end
- Requires a 40 Amp Breaker

INCLUDED IN BOX:
- Alpha TIG 225Xi
- SR26 Straight Neck TIG Torch (12.5ft, 35-70 DINSE Connection, 9mm Quick Connect)
- Stick Holder (9ft)
- Ground Clamp (6ft)
- Nova Foot Pedal
- Argon Regulator
- 110v Plug Adapter
- Basic Consumable Kit (does not include tungsten)